1. Made of super bright LED chip with high quality.
2. The lamp is filled with resin inside, which makes it 100% waterproof.
3. Low power consumption, high stability.
4. Supports different kinds of color modes.
5. Easy to install, fitting to standard pool fittings.
6. Used for both Fresh or salt water pool.
Item No |
Material |
Power |
Color |
Product size |
Control Way |
Voltage |
FT-YC230 |
pc |
9W |
W/WW/R/G/B/Y/RGB |
φ230*H50mm |
Single color/RGB switch control/
RGB remote control |
1.Single color: AC/DC12-24V 2.RGB Color normally Do AC12v 3.with 2meter Wire 4.IP68 waterproof |
12W |
||||||
FT-YC245 |
pc |
9W |
φ245*H50mm |
|||
12W |
||||||
FT-YC295 |
pc |
15W |
φ295*H50mm |
|||
18W |
||||||
24W |
||||||
FT-YC300 |
pc |
35W |
φ300*H50MM |
|||
45W |
||||||
60W |
1. Using thick housing body, we do strictly select production material, not easy to corrosion, long service life, durable.
2. high quality lampshade is made of explosion-proof and waterproof PC material, which is not easy to break, good light transmittance, and good heat dissipation effect.
3. We use high Brightness light source, high power lamp bead, highlighted foot title,energy saving, high color rendering.
Swimming pool, fountain, pond, spring, water view, artificial waterfall, etc.
1. Please calculate the transformer according o numbers of lamps.
2. If you need play 20pcs light of same steps, please calculated as 7.5w*20pcs*1.3=195W.
3. Working in 12v .
4. Transformer and RF controller should be controlled in 10m distance from lamps.
5. If distance is far away from lights, you need add power supply and RF controller watts.
Q1. Is sample available?
A: Of course,sample order are welcomed to test the quality. Mix sample are acceptable also.
Q2. How about the remote controlling results for your RGB lamps?
A: Our lamps is with imported signal receiving model,and the controling results will be much better than the similar products in the market.
Q3. How about the control method of your RGB lamps?
A: Remote controller and switch controller is available.
Q4. How about the depth for the lamps installation in the pool?
A: The recommended depth for the lamps will be 0.3m-1.5m.If the lamps were installed too deep under the water,will do affact the control results.
Q4. Is it OK to print my logo on led light product?
A: Yes, Please inform us formally before our production and confirm the design firstly base on our sample
Q5. DO you have offer guarantee for the products?
A: Yes, We offer 3year warranty to our products
Q6. how to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%
Secondly, During the guarantee period, we will send new lights with new order for small quantity, for defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation